Are you frustrated with your Bose 700 remote not functioning as it should? You’re not alone! Many users have reported issues with their Bose 700 remote, ranging from unresponsive buttons to complete system failure. In this article, we’ll dive into the common problems you might encounter with your Bose 700 remote and provide step-by-step solutions to get it working again.
Understanding the Bose 700 Remote
Before we dive into troubleshooting, it’s essential to understand how the Bose 700 remote works. The Bose 700 remote is a sleek, compact device that uses infrared (IR) signals to communicate with your Bose 700 soundbar. The remote is powered by a CR2032 battery, which typically lasts for several months with moderate use. The remote features a range of buttons, including volume controls, playback controls, and settings options.
Common Issues with the Bose 700 Remote
So, what’s going wrong with your Bose 700 remote? Here are some common issues users have reported:
Unresponsive Buttons
One of the most frustrating issues with the Bose 700 remote is unresponsive buttons. You press a button, but nothing happens. This problem can be caused by a range of factors, including:
- Dead or weak battery: A dead or weak battery can cause the remote to malfunction.
- Dirt and dust buildup: Dirt and dust can accumulate on the remote’s buttons and sensors, preventing them from registering presses.
- Interference from other devices: Other devices in your home, such as cordless phones or baby monitors, can interfere with the IR signal, causing the remote to malfunction.
Inconsistent Volume Control
Another common issue with the Bose 700 remote is inconsistent volume control. You might find that the volume doesn’t adjust smoothly or that it gets stuck on a particular level. This problem can be caused by:
- Incorrect volume settings: Make sure that the volume settings on your Bose 700 soundbar are set correctly.
- Interference from other devices: As mentioned earlier, interference from other devices can cause issues with the IR signal, leading to inconsistent volume control.
Remote Not Pairing with the Soundbar
If your Bose 700 remote isn’t pairing with the soundbar, you might see a flashing LED light on the remote or a “No Signal” message on the soundbar’s display. This problem can be caused by:
- Incorrect pairing process: Make sure you’re following the correct pairing process, as outlined in the user manual.
- Range issues: The remote might be out of range from the soundbar, preventing pairing.
Troubleshooting Steps for Your Bose 700 Remote
Now that we’ve identified some common issues with the Bose 700 remote, let’s dive into troubleshooting steps to get it working again.
Step 1: Check the Batteries
A dead or weak battery is one of the most common causes of remote control issues. Try replacing the battery with a new CR2032 battery. If you’re not sure how to replace the battery, consult the user manual or contact Bose support.
Step 2: Clean the Remote
Dirt and dust buildup can prevent the remote’s buttons and sensors from registering presses. Use a soft cloth and a gentle cleaning solution to wipe down the remote. Avoid using harsh chemicals or abrasive materials that can damage the remote’s surface.
Step 3: Check for Interference
Interference from other devices can cause issues with the IR signal. Try moving other devices away from the remote and soundbar to see if it resolves the issue. You can also try changing the channel on your cordless phone or baby monitor to reduce interference.
Step 4: Reset the Remote
If the above steps don’t work, try resetting the remote. To reset the remote, press and hold the Volume Down button and the Source button simultaneously for 10 seconds. Release the buttons and wait for the remote to restart.
Step 5: Pair the Remote with the Soundbar Again
If the remote isn’t pairing with the soundbar, try pairing it again. To pair the remote, press and hold the Volume Down button and the Source button simultaneously for 10 seconds. Release the buttons and wait for the remote to pair with the soundbar.
Advanced Troubleshooting Steps
If the above steps don’t resolve the issue, it’s time to get a little more advanced.
Using the Bose Soundbar’s IR Window
The Bose 700 soundbar has an IR window located on the top of the speaker. Try pointing the remote directly at the IR window to see if it resolves the issue. This can help improve the IR signal strength and reduce interference.
Checking for Firmware Updates
Firmware updates can resolve issues with the remote and soundbar. Check the Bose website for firmware updates and follow the instructions to update your soundbar.
Conclusion
Troubleshooting your Bose 700 remote can be frustrating, but by following these steps, you should be able to resolve the most common issues. Remember to check the batteries, clean the remote, eliminate interference, reset the remote, and pair it with the soundbar again. If you’re still experiencing issues, it’s time to get a little more advanced and try using the IR window or checking for firmware updates. With a little patience and persistence, you should be able to get your Bose 700 remote working again.
Why won’t my Bose 700 remote turn on?
If your Bose 700 remote won’t turn on, the first thing to check is the battery level. Make sure the batteries are not dead or weak. Try replacing them with new ones or charging them if they are rechargeable. Also, check if the batteries are inserted correctly, as improper insertion can prevent the remote from functioning.
If the battery is not the issue, the problem might be with the remote’s power button. Try pressing the button firmly for a few seconds to see if it turns on. If it still doesn’t work, try resetting the remote by pressing and holding the power button for 10-15 seconds. This will restore the remote to its factory settings and may resolve the issue.
Why is my Bose 700 remote not responding to commands?
If your Bose 700 remote is not responding to commands, the issue might be with the pairing process. Make sure the remote is properly paired with the Bose 700 soundbar. Try unpairing and re-pairing the remote to see if it resolves the issue. Also, check if there are any obstacles between the remote and the soundbar that could be blocking the signal.
If the pairing is not the issue, the problem might be with the remote’s infrared sensor. Try cleaning the sensor with a soft cloth to remove any dirt or debris that may be blocking the signal. Also, make sure the remote is not exposed to direct sunlight or bright lights, as they can interfere with the signal.
How do I reset my Bose 700 remote?
To reset your Bose 700 remote, press and hold the power button for 10-15 seconds. This will restore the remote to its factory settings and erase all paired devices. After the reset, you’ll need to re-pair the remote with the Bose 700 soundbar.
Note that resetting the remote will not affect the soundbar’s settings or your saved preferences. It will only reset the remote’s pairing information. If you’re still experiencing issues after resetting the remote, try restarting the soundbar as well to see if it resolves the problem.
Why is my Bose 700 remote not controlling the volume?
If your Bose 700 remote is not controlling the volume, the issue might be with the remote’s volume settings. Make sure the volume mode is set to “Variable” instead of “Fixed”. You can do this by pressing the “Volume Mode” button on the remote and selecting “Variable”.
If the volume mode is set correctly, the problem might be with the soundbar’s volume settings. Try adjusting the volume on the soundbar itself to see if it responds. If it doesn’t, try resetting the soundbar to its factory settings and see if it resolves the issue.
Can I use my Bose 700 remote with other devices?
The Bose 700 remote is specifically designed to work with the Bose 700 soundbar. It’s not compatible with other Bose products or third-party devices. If you’re looking for a universal remote, you may need to purchase a separate remote control that is compatible with multiple devices.
However, you can use the Bose Music app to control the Bose 700 soundbar using your smartphone or tablet. The app allows you to adjust the volume, switch between sources, and access other features of the soundbar.
How do I clean my Bose 700 remote?
To clean your Bose 700 remote, use a soft, dry cloth to wipe down the surface. Avoid using liquids or chemicals, as they can damage the remote’s electronics. Gently wipe away any dirt, dust, or debris that may be accumulated on the surface.
For more stubborn stains or dirt buildup, you can dampen a cloth with water, but make sure to wring it out thoroughly to avoid any moisture from entering the remote. Avoid using harsh chemicals or abrasive cleaners, as they can damage the remote’s finish or harm the electronics.
What if none of these troubleshooting steps work?
If none of the troubleshooting steps work, it’s possible that there’s a hardware issue with the remote or the soundbar. In this case, you may need to contact Bose customer support for further assistance or to request a repair or replacement.
Make sure to have your remote’s serial number and soundbar’s model number ready when you contact customer support. They will be able to assist you in diagnosing the issue and provide a solution or recommend a repair or replacement option.